Half Gas CNC 11.8mm Keep-Nut Drilling Bit
$48.00
Tags:
11.8mm Diameter CNC Dill Bit, 1/2 GAS for drilling KEEP-NUT press-in self-anchoring insert holes.
KEEP-NUT CNC Set-Up Info:
- Hole Diameter: 12 mm (+/- .2mm)
- Bit Diameter: 11.8 mm
- Depth: 6.5 mm (.26″)*
- RPM: 3500
- Feed Rate: 1.5 in/min
- Anchor Placement: Approximately 2″ from sink cut-out on center or edge of material
*Depth may vary depending on the KEEP-NUT press-in self-anchoring insert being used
BARCODE SKU
T-CLIPS-KNBIT-CNC _productIds
1704271000021523003,1704271000000473170,1704271000022969003,1704271000050655218,1704271000050655048,1704271000053067215,1704271000053067256,1704271000053067321,1704271000021944005,1704271000029762001,1704271000047873127,1704271000000474735 Choose Quantity